FM200 Fire Suppression System Alarm System With Low Maintenance For Fire Detection

Single cabinet type of fm200 automatic fire suppression system

Parameter:

Description:

An FM200 automatic fire suppression system is a type of gaseous fire suppression system designed to extinguish fires quickly and efficiently in critical areas where water-based fire suppression systems would be detrimental to sensitive equipment or materials. FM200 is a clear, colorless, and electrically non-conductive gas that leaves no residue after discharge.

The FM200 system comprises of FM200 cylinders, release valves, detection, and control panels, piping, and discharge nozzles. The detection and control panels include heat detectors, smoke detectors, manual call points, and pre-action systems.

When a fire is detected, the FM200 system is triggered to release FM200 gas into the affected area, extinguishing the fire by reducing the oxygen concentration to a level where combustion can no longer occur. The FM200 gas is distributed through the piping system and nozzles to the protected area, which is designed to provide fast and effective fire suppression with minimal disruption to the protected area, occupants, and assets.

One of the main advantages of the FM200 system is its fast response time, which can suppress a fire within seconds after detection. The FM200 gas is also safe for use in occupied spaces and leaves no residue, making it ideal for use in areas with sensitive equipment such as computer rooms, data centers, and telecom facilities.

FM200 automatic fire suppression systems are commonly used in critical industrial applications such as data centers, computer rooms, archives, museums, and clean rooms, among others. The system is an efficient and reliable solution for protecting high-value assets and minimizing production downtime in the event of a fire. It is also environmentally friendly since it has no ozone depletion potential and has a low global warming potential, making it an ideal choice for organizations that prioritize sustainability.

Applications:

    Electronic computer room, a data processing center, telecommunications facilities, process control, expensive medical equipment, industrial equipment, library, museum and art gallery, clean room, anechoic chamber, emergency power facilities, flammable liquid storage area, etc.

    The place where the fire is easy to happen, like paint-spraying production line, aging-electrical equipment, rolling machine, printing machine, oil switch, oil immersed transformer, melt impregnating tank, tank, large generators, drying equipment, cement pro duction process of pulverized coal, and the ship's engine room, cargo hold, etc.

Compositions:

    single cabinet type of fm200 automatic fire suppression system is mainly composed by two parts. Extinguishing devices and electrical accessories.

    Extinguishing devices are such things, like cabinet to store extinguishing device, cylinder to fill and store fm200 and flexible hose ans solenoid actuator and so on.

    Electrical accessories are those things which are used to detect and monitor whole protective area and control whole system, also warn people to evacuate and prevent from fire expansion.

    These integrated two parts will be efficient to detect and supervise and alarm and extinguish fire automatically.

    Here attached below is complete composition of whole system,

Competitive Advantage:

    In terms of description of agent, one of its competent advantages is that it can be used for all kinds of class fires except metal fire. And it is clean agent. There is no residue and pollution after extinguishing.

    Another one is that fm200 extinguishing system is special for critical assets or device. It will have no damage for your property. Relatively, it is cheap and effective to be chosen as fire suppression system.

    It is very efficient for you to protect your possession. Since it is a system, it include extinguishing device to put out fire at short time, specially, shorter than 10 second. It means all agent will be discharged in so short time. Then it will be flooding overall. In addition, it has time-delay mechanism. It is around 2 minute. It means when fire happens, there is enough time left to evacuate people from hazardous place.

    Different from piped network type of fm200 automatic fire suppression system, it will be simple to install. Because there is no pipeline installation. If your protective zone is relatively small and there is no multiple zones more than three, it will save much money than the former.

Working principle:

Here is the illustration of working principle to whole system,

Simulated diagram:

Below attached is one mimic diagram of single cabinet type of fm200 automatic fire suppression system,

Company Introduction

Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.

Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the line four and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.